How to Reduce Your Electricity Bill in Pakistan: What Actually Works
Most "save electricity" lists say the same things: switch off lights, unplug chargers. Those help a little. In Pakistan, though, the biggest savings come from understanding how the tariff is built — because a few units in the wrong place can cost more than a month of careful switching off.
1. Know where the slab limits are
An unprotected home pays every unit at the rate of the slab it lands in. Crossing a limit by one unit raises the price of all your units, not just the extra one:
| Change | Bill before | Bill after | Extra |
|---|---|---|---|
| 100 → 101 units | Rs 3,638 | Rs 4,498 | Rs 860 |
| 300 → 301 units | Rs 13,565 | Rs 14,919 | Rs 1,354 |
| 200 → 201 units (protected home) | Rs 3,814 | Rs 8,948 | Rs 5,134 |
Unprotected rows at 2 kW, protected row at 1 kW. Current FPA and 18% GST included.
What to do: read your meter on the same date each week. When you are close to 100, 200, 300 or 400 units with days left in the billing cycle, cut back for those days. The bill calculator tells you how many units you are from the next slab.
2. Protect your protected status
If your home stays at 200 units or less for six months in a row, you are billed at protected rates — less than half the unprotected price. One month above 200 and you lose it for the next six. For a family that is close to the limit, keeping protected status is worth more than any other tip on this page. Read protected vs unprotected for the full rule, and use the protected status checker to see how many units you have left.
3. Run the AC at 26°C
A 1.5-ton non-inverter AC running 8 hours a day uses roughly 432 units a month — on its own enough to push most homes out of the protected range. Setting it to 26°C instead of 22°C, with a fan on, typically cuts its use by 15% or more: about 65 units a month. Clean the filters every two weeks in summer; a clogged filter makes the compressor run longer.
If you are replacing an old AC, an inverter model usually uses 30–50% less. Check the payback with the inverter AC savings calculator.
4. Watch the "hidden" heavy users
- Water motor: a 1 HP motor running one hour a day is about 23 units a month. A leaking tank float or a running toilet can double that without anyone noticing.
- Old fridge: a fridge with a worn door seal runs almost continuously. Close the door on a piece of paper — if it slides out easily, the seal needs replacing.
- Electric geyser and iron: 1–3 kW each. Use them for short, planned periods.
- UPS charging: an old battery that never holds charge keeps the UPS drawing power all day.
Not sure where your units go? List your appliances in the appliance load calculator.
5. Check your sanctioned load
Your fixed charge is your sanctioned load in kW multiplied by a per-kW rate, every month. If your connection is sanctioned for more than you ever use, you are paying for nothing. See sanctioned load and fixed charges.
6. Check your bill for mistakes
Compare the "present reading" on your bill with your meter. Check that the bill uses the right category (protected or not) and the right number of days. If something is wrong, take your bill and a photo of the meter to your DISCO's customer service centre. Our bill-reading guide explains every line.
7. Consider solar — with realistic numbers
For homes using 300 units or more, solar is still the biggest single saving. Since 2026, new connections are on net billing, where exported units earn much less than imported units cost, so the best systems are sized to cover what you use during the day. Read net billing explained, then try the solar size and payback calculators.